4x4 Rock Slider Kits | Nissan, Toyota & More
Made in Australia
Lifetime Guarantee
Money Back Guarantee
THIS IS A WELD TOGETHER KIT
ROCK SLIDER WIDTHS
ALL FASTENERS PROVIDED
RUST INHIBITING PRIMER
BRACKET INSTRUCTIONS INCLUDED
QUICK FAQ's ABOUT OUR ROCK SLIDERS
Australian Made & Owned
Australian Made & OwnedPickup available at 88 commercial road vineyard
Usually ready in 2-4 days
4x4 Rock Slider Kits | Nissan, Toyota & More
Standard / Design 1 / 6 x Universal Chassis Brackets & Gussets
88 commercial road vineyard
88 Commercial Road
Vineyard NSW 2765
Australia
Weld-Together Rock Slider Kit (Universal Application)
This rock slider kit is designed to suit a wide range of 4x4 vehicles including Nissan, Toyota, Ford, Isuzu, Mazda, Mitsubishi, Holden, Jeep, Suzuki, Volkswagen, Mercedes-Benz, LDV, Land Rover and Great Wall Motors. When ordering, you’ll choose your vehicle make, model, and series, then select your preferred rock slider kick-out style, design, and mounting option to suit your vehicle.
Mounting Options
1. Universal Chassis Brackets (Universal Mounting Kit)
Designed to suit the widest range of chassis rails and supplied as a complete bolt-on kit:
-
6 × L-brackets
-
5 mm thick mild steel (250 MPa)
-
50 mm wide
-
Long side (inside): 225 mm with slot
-
Short side (inside): 145 mm
-
Raw steel (no coating)
-
-
6 × straight brackets
-
5 mm thick mild steel (250 MPa)
-
50 mm wide × 225 mm long
-
Slot: 12.5 mm wide × 100 mm long
-
Slot starts 10 mm from top
-
Raw steel
-
-
6 × M12 full-thread bolts
-
200 mm long
-
Zinc plated, 8.8 high-tensile
-
-
6 × triangle gussets
-
4 mm thick mild steel (250 MPa)
-
80 mm × 80 mm
-
Corner notch for easy fitment
-
Raw steel
-
-
12 × rectangular plates
-
40 mm × 25 mm × 5 mm thick
-
13 mm centre hole
-
250 MPa mild steel
-
Raw steel
-
-
12 × M12 flat washers (high-tensile, zinc plated)
-
6 × M12 nylock nuts (high-tensile, zinc plated)
2. Weld-On Chassis Brackets
Designed for a permanent weld-on installation:
-
6 × 10 mm thick steel plates
-
70 mm × 85 mm
-
250 MPa
-
4 threaded/tapped holes to suit M12 bolts
-
Holes positioned 13 mm in from each end
-
Raw steel
-
-
6 × 6 mm thick steel plates
-
70 mm × 85 mm
-
250 MPa
-
4 clearance holes at 14 mm
-
Raw steel
-
-
24 × M12 full-thread bolts
-
Zinc plated, 8.8 high-tensile
-
-
24 × M12 thin flat washers (high-tensile, zinc plated)
-
24 × M12 spring washers (high-tensile, zinc plated)
3. Flat Bar Brackets
Supplied for custom fabrication to suit your chassis:
-
2 × 1500 mm long × 5 mm thick mild steel flat bar
-
Raw steel (no coating)
-
Designed to be cut down and fabricated as required
4. No Mounts
-
Rock sliders only
-
No mounting hardware included
Safety & Preparation
-
Welding and fabrication are required
-
All components are supplied in raw steel with a protective coating against rust and corrosion, and we recommend cleaning and coated before use
Choose options
Quick FAQ's
Please find below a list of commonly asked questions
Assembly & Fitment
Freight
Why Customers Love What We Do
Easy to Assemble
"Unreal bit of gear! Easy to put together if you have some welding skills! Everything slots together nicely and comes up a treat!!"
★★★★★
Zakary Preece
Custom Mounting Options
"Perfect rock slider kit for 4x4’s with modified suspension. Having the ability to custom mount to chassis was the selling point for myself."
★★★★★
Daniel Sargent
Made in Australia
"The quality of all the tubing, bends, notches and brackets is awesome and the kit comes at a pretty decent price too... if your not sure on this product I can vouch for DIY Customs."
★★★★★
Tom Dixon
Made to Last
"All cuts/notches were clean. Everything fit well. Very easy kit to weld up. I’ve been using these for months and they hold up. Highly recommend."
★★★★★
David Van Gelder
Real Builds Gallery
See how DIY Customs Rock Sliders are put to the test.
Frequently Asked Questions
Assembly & Fitment
Quality Guarantee
Shipping
Industry-Leading Tools. Superior Results.
Precision-Cut In-House with Australian Steel
Universal and Weld-on Chassis Brackets are CNC laser-cut for unmatched precision using high-quality Australian-made steel. Every piece is fabricated in-house under strict quality control standards to ensure accuracy, durability, and consistency across all builds.
Every Cut Counts. And We Control Them All.
Consistent Cuts You Can Count On
We use a high-performance CNC tube cutter made in the USA, specifically calibrated for round tubing. It delivers precise, repeatable cuts every time ensuring consistent fitment and tight tolerances across every part.
Digitally Controlled. Mechanically Precise.
Precision Bends with Industry-Leading Accuracy
Tubing bends are done using an American-made JD Squared digital hydraulic bender known across the industry for producing the highest quality bends with unmatched repeatability, trusted by fabricators worldwide for its unbeatable performance and accuracy.
Dive into the features that make our sliders dependable from fabrication to final delivery
Built Without Compromise
From Foundry to Fabrication
It’s your build, but our process. From raw steel to your rig, we’ve refined every step. We’ve been here—testing, improving, and backing every kit with experience.
Hardware You Can Trust
Every bolt, nut, and washer is carefully chosen for strength and reliability. With Grade 8.8 tensile rating and corrosion-resistant coating, safety is never left to chance.
Built for Your Fitment
Our Rock Slider kits give you complete fitment freedom. Position and finish them exactly how you see fit, then take them on any trail with confidence.
Build-Ready Rock Sliders for Serious Off-Roaders
Protect your rig with heavy-duty DIY rock sliders. Designed for easy welding and precise fitment, they’re built to handle tough terrain and serious abuse.
Wherever You Go, Go With Confidence
DIY Customs rock sliders are built tough to handle harsh tracks and rugged terrain, no compromises.
As Seen On
